Sensonic 1400

madur electronics


	Home \| News \| Products \| About us \| Contact \| Info


	Products >> Portable flue gas analyzer Sensonic 1400

Sensonic 1400

A further development from the tried and tested Sensonic 1200 hand-held flue gas analyzer. This new analyzer is equipped with the following extra features:

Can be fitted with up to 4 electrochemical sensors.
Suitable for a soot test using electronically controlled gas volume.
Fitted with a powerful Li ion battery.
Big memory capable of storing 32 measurement reports.
Backlit graphic LCD
Robust metal connectors

An attractive alternative to other, bigger analyzers. Manufactured according to the principles of EN50379.

Pictures...
Folder () Sensonic 1400

Standard and optional configuration
Measurement of gas concentrations	Standard version with two gas sensors: O₂, CO Two further optional sensors from: NO, NO₂, SO₂, H₂S. NO required as third sensor CO ambient measurement with a resolution of 0.1 ppm
Measurement of other parameters	Measurement of gas and ambient temperatures Pressure or draft pressure measurements with 0.1 Pa resolution Relative humidity measurement probe - optional Soot/smoke test according to the Bacharach method - electronically regulated to 1.63 l
Calculation	CO₂ concentration Calculation of all relevant combustion parameters
Processing and presentation of measuring data	All results shown on display Averaging of all measured values. Averaging time: 2, 10, 20, 30, 60, 120, 180 seconds Graphical presentation of all measured values as diagram Storage for 32 measurements - "measure now, print later" Powerful PC program for analyzer settings and data communication
Software capabilities	Automatic zeroing when the analyser is switched on All settings for the flue gas analyzer carried out with PC programm List of 6 common fuels (from DIN or OENORM) 4 further freely programmable fuels Permanent automatic check of the instruemnt with acoustic warning and full information in the "control list"
Hardware capabilities	Integrated clock/calendar IR interface for external printer Incredible 75 hours operating time from one set of batteries Full graphic display LCD 66 x 36 mm Gas probe with thermocouple and condensate trap Power supply for heated probe holder (when powered from the mains) RS-232C interface and multifunctional PC program Updateable FLASH ROM program memory Simple, intuitive operation, like a mobile phone
Optional accessories	differential pressure measurements with 0.1 Pa resolution Flow velocity measurement leather-look case for storage and rubber boot for protection of the instrument Magnetic plate to attach the instrument to steel surfaces External thermal printer with wireless IR communication

Technical data
Size	245 x 90/128 x 60 mm
Weight	0.7 kg
Probe	Heated, with condensate trap and filter
Probe length	300 mm
Length of gas line	2 m
In line filter	in-line, Filter 20 µm
Display	LCD graphic display 36 x 66 mm
Power supply	mains adapter or internal rechargeable battery (24 hours)
Interface	RS232C for external computer communication IR connection for external printer
Gas pump	Membrane pump
Zero calibration	automatic 120 sec. after switching on. Manual option
Clock/calendar	Integrated clock/calendar
Operating temperature	10 °C ÷ 50°C
Storage temperature	-20 °C ÷ +55 °C

Measurements
Parameter	Method	Indication range	Display resolution	Accuracy	Detection limit	Time (t90)
Standard sensors (O₂, CO)
O₂ - oxygen, volumetric concentration	electrochemical gas sensor	0..25 %	0.01 %	±0.2 % or 2 % rel.	0.2 %	45 s
CO₂ - carbon dioxide, volumetric concentration	calculated from volumetric concentration of O2	0..25 %	0.01 %	±0.2 % or 2 % rel.	0.2 %	45 s
CO - ambient carbon monoxide, volumetric concentration	electrochemical gas sensor	0..100 ppm	0.1 ppm	±1 ppm or 5 % rel.	1 ppm	45 s
CO - carbon monoxide, volumetric concentration	electrochemical gas sensor	0..2000 ppm	1 ppm	±5 ppm or 5 % rel.	5 ppm	45 s
COmg - carbon monoxide, mass concentration	calculated from volumetric concentration of CO	0...	1 mg/Nm3	±10 mg/Nm³ or 5 % rel.	5 mg/Nm³	45 s
COrel - carbon monoxide, mass concentration relative to O₂	calculated from volumetric concentration of CO and O₂	0...	1 mg/Nm³	±10 mg/Nm³ or 5 % rel.	5 mg/Nm³	45 s
Optional sensors
CO - carbon monoxide, volumetric concentration	electrochemical gas sensor	0...20.000ppm	1 ppm	±5 ppm or 5 % rel.	5 ppm	45 s
CO - carbon monoxide, volumetric concentration	electrochemical gas sensor	0...10 %	0.01 %	0.05 % or 5 % rel.	0.01 %	45 s

NO - volumetric concentration of nitric oxide	electrochemical gas sensor	0..1000 ppm	1 ppm	±5 ppm or 5 % rel.	5 ppm	45 s
NOmg - mass concentration of nitric oxide	calculated from volumetric concentration of NO	0...	1 mg/Nm3	±10 mg/Nm³ or 5 % rel.	3 mg/Nm³	45 s
NOrel - mass concentration of nitric oxide relative to O₂	calculated from volumetric concentration of NO and O₂	0...	1 mg/Nm³	±10 mg/Nm3 or 5 % rel.	3 mg/Nm3	45 s

NO₂ - volumetric concentration of nitrogen dioxide.	electrochemical gas sensor	0...500 ppm	1 ppm	±5 ppm or 5 % rel.	5 ppm	45 s
NO₂mg - mass concentration of nitrogen dioxide	calculated from volumetric concentration of NO₂	0...	1 mg/Nm3	±15 mg/Nm³ or 5 % rel.	15 mg/Nm³	45 s
NO2rel - mass concentration of nitrogen dioxide relative to O₂	calculated from volumetric concentration of NO₂ and O₂	0...	1 mg/Nm3	±15 mg/Nm³ or 5 % rel.	15 mg/Nm³	45 s

SO₂ - volumetric concentration of sulfur dioxide	electrochemical gas sensor	0...2000 ppm	1 ppm	±5 ppm or 5 % rel.	5 ppm	45 s
SO₂mg - mass concentration of sulfur dioxide	calculated from volumetric concentration of SO₂	0...	1 mg/Nm3	±15 mg/Nm³ or 5 % rel.	15 mg/Nm³	45 s
SO₂rel - mass concentration of sulfur dioxide relative to O₂	calculated from volumetric concentration of SO₂ and O₂	0...	1 mg/Nm³	±15 mg/Nm³ or 5 % rel.	15 mg/Nm³	45 s

H₂S - volumetric concentration of hydrogen sulfide	electrochemical gas sensor	0...500 ppm	1 ppm	±5 ppm or 5 % rel.	5 ppm	45 s
H₂Smg - mass concentration of hydrogen sulfide	calculated from volumetric concentration of H₂S	0...	1 mg/Nm³	±15 mg/Nm³ or 5 % rel.	15 mg/Nm³	45 s
H₂Srel - mass concentration of hydrogen sulfide relative to O₂	calculated from volumetric concentration of H₂S and O₂	0...	1 mg/Nm³	±15 mg/Nm³ or 5 % rel.	15 mg/Nm³	45 s
Further measured values
Tgas - flue gas temperature	Thermocouple	-10..1000°C	0.1 or 1°C set by user	±2 °C or 1.5 % rel.	1 °C	30 s
Tamb - ambient temperature	Thermistor	-10..100°C	0.1 or 1°C set by user	± 1 °C	1 °C	30 s
Pressure	DMS bridge	-25 hPa ... +25 hPa	0.1 or 1 Pa set by user	±2 Pa or 5 % rel.	1 Pa	10 s
Diff. Pressure	DMS bridge	-25 hPa ... +25 hPa	0.1 or 1 Pa set by user	±2 Pa or 1 % rel.	1 Pa	10 s
V - flow velocity	Pitot tube	1..30 m/s	0.1 m/s	0.5 m/s or 2 % rel.	1 m/s	10 s
rH -relative humidity	capacitive sensor	5..95 %	0.01 %	2 % rH or 2 % rel.	5 %	10 s
Soot/smoke test	Bacharach method	0..9	0.5	0.5	0.5
Combustion parameters
TI (CO/CO₂-Toxic Index)	calculated	0...0.01	0.0001	5 % rel.	0	45 s
Lambda - excess air number	calculated	1..10	0.01	2 % rel.	0	45 s
qA - combustion losses	calculated	0..100 %	0.1 %	2 % rel.	0 %	45 s
Eta - efficiency	calculated	0..120 %	0.1 %	2 % rel.	0 %	45 s